manualshive.com logo in svg

GSS ME 200, Operating Instruction, Page: 19 / 24

Share
Download
GSS ME 200 Operating Instruction Download Page 19

 

 

- 19 - 

ME 200

 

•  Press the 

OK

 button to save the timer.

 

•  Use button   to edit an already programmed timer.

 

•  Use the   button to delete a timer.

 

For the timer function, the device must remain switched on.

 

s

ort

 

In the 

Sort

 menu, you can specify the order of the channels according to cer-

tain criteria (Default - channel table, By Encrypt, By Freq, By Service Name).

 

tv 

oper atIon

 

Press the 

EXIT

 button to switch to TV mode from the main menu.

 

Using button 

OK

 you call up the channel table.

—>  To return to the main menu, press the MENU button.

 

s

tart

 D

IreCt

 r

eCorDIng

 

While you are watching a channel, you can start a direct recording with but-
ton   and stop with button  .

 
 

To play back recordings, switch to the 

MULTIMEDIA

 

menu.  All  recordings  are  listed  under  the  menu 
item 

PVR

 (Personal Video Recorder; page 23).

 

s

tart

 t

Ime

-

shIft

 r

eCorDIng

 

While watching a programme, press button   to start a time-shift recording. 

 

Press key   to start time-shifted playback.

—>  The time offset is displayed.
 

—>  You can set the memory size for time-shift recordings - and thus the 

time that can be bridged - in the 

Configure PVR

 menu (page 21).

 

Press button   to exit Time-shift.

Summary of Contents for ME 200

























Reviews:

No comments