- 27 -
HMPT 1000 T
• Press the
button.
—> The "Adjusting the output levels of the channel strips" – "
LEVEL
" menu is
activated.
Adjusting the output levels of the channel strips
This menu item is used to set the output levels of the modulators of the channel
strips
"
A
" and "
B
"
to the same value.
Bx 4A
0 dB
LEVEL
• Measure and note down the output level of the channel strip.
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.
• Select the other channel strip (page 25) and set the following menu items:
• "Selecting channel / frequency setting", page 25.
• "Setting the output channel" or "Setting the output frequency", page 26.
• Switch on the modulator if necessary, page 26.
• Measure and note down the output level.
• Activate the "
LEVEL
" menu of the channel strip with the higher output level.
• By pressing
adjust the higher output level of the one channel strip
to the lower output level of the other channel strip incrementally ("
0
" …
"
–10 dB
").
• Press the
button.
—> Channel strip "
A
":
The "Selecting the input transport stream" – "
INPUT
" menu is activated.
—> Channel strip "
B
":
The "Switching the IP address off or on, selecting the transmission pro-
tocol, setting the port number" – "
MODE / PORT
" menu is activated