- 19 -
HDMT 660 CI TPS
o
utput
freQuenCy
, o
utput
Channel
, m
odul ator
In this menu, dependent on the setting before, you set the output frequency
(42.0 … 860.0 MHz) resp the output channel (S21 … C69) of the channel
strip. Additionally the modulator of the channel strip can be switched off or on.
Bx 1A
S21 / S22
OUTPUT
on
oder
Bx 1A
306,0 / 314,0
OUTPUT
on
• Use the
buttons to position the cursor under the digit to be set for
the frequency or channel display then use
to set the desired output
frequency or channel.
—> The modulator in this module employs automatic neighbouring-chan-
nel assignment. This means that the output channel/frequency of
channel strip "
B
" will always be 1 channel/8 MHz above the output
channel/frequency of channel strip "
A
".
• Using the
button, move the cursor under "
on
" and then use the
buttons to switch off or on the channel strip (modulator) if necessary.
—> The switched off channel strip is indicated in the display with "
- - -
".
Bx 1A
– – – / S22
OUTPUT
off
oder
Bx 1A
––––– / 314,0
OUTPUT
off
—>
Channel strip "B":
Use the same process as described above.
Bx 1B
S21 / S22
OUTPUT
on
oder
Bx 1B
306,0 / 314,0
OUTPUT
on
Bx 1B
S21 / – – –
OUTPUT
off
oder
Bx 1B
306,0 / –––––
OUTPUT
off
—>
For using "SelecPlex®", in
channel strip "B"
only the normal chan-
nel separation of 8 MHz can be reduced up to 2 MHz.
• Press the
button.
—> The "Output level" – "
LEVEL
" menu is activated.
