- 32 -
HDMT 1000 SPTS
o
Per ation
with
a
Ca
module
In order for this function of the CA module to be possible, in the "Selecting
the input data stream" – "
INPUT
" menu (page 21) an input signal source must
be selected whose data stream contains services which can be descrambled
by the CA module you are using and your smart card. Where both scrambled
stations and unscrambled regional services are transmitted, short-term picture
loss may occur when switching between scrambled and unscrambled services.
s
et ting
the
Pid
monitoring
The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CI module is reset. Additionally
dropouts may occur if several services are descrambled. To prevent this the
PID monitoring can be switched off.
Bx 4A
PID Check
CA
on
• Use the
buttons to switch "
off
" or "
on
" the PID monitoring.
• Press the
button.
—> The "Configuring the CA module" – "
CA
" menu is activated.
C
onfiguring
the
Ca
module
The menu varies according to which CA module you are using. For this rea-
son, please refer to the operating manual of your particular CA module. The
relevant information is shown in the display of the head-end station. This may
appear as a fixed display or as scrolling text according to display capabilities.
Bx 4A
Menu <=
CA
=> Edit
Bx 4A 01/03
Information *)
MENU
Bx 4A TV X
. . . .
04/09
Å
Ï
M
Bx 4A TV X
. . . .
04/09
Å