- 6 -
HDMC 1000 FM
2.4 d
esCriPtion
The cassette converts 12 stereo audio channels from two COFDM and QAM
modulated transponders and the ASI input signal into 12 FM modulated stereo
output channels.
The RDS station code is automatically taken from the station name of the trans-
ponder or can be entered manually.
Via input A and a corresponding CA module scrambled channels can be de-
scrambled.
Principle signal path:
HF output
TS A
Input ”A“
Receiving stage
"A"
CA module
ASI input
TS ASI
Input ”B“
Receiving stage
"B"
TS B
Combiner
12 fold modulator
TPS
The cassette is controlled with the head-end station control unit.
Two LEDs indicate by their colour the quality of the input signals (see figure on
page 10).
LED indicator
Indication
Green blinking
During boot sequence
Green
Signal quality is good
Yellow
Signal quality is poor
Red
No signal
Off
No transponder selected
To operate this cassette the software version of the control unit must be "V 44"
or higher. You can find the current operating software for the control unit and
the cassette, the software "BE-Flash" and the current assembly instructions on
the website "www.gss.de".
The cassette is designed for use in head-end stations of the standard line.