- 25 -
HDMA 784 C ASI
• Press the button.
—> The "Input frequency" – "
FREQ
" submenu is activated.
i
nput
freQuenCy
—> This menu is only available if a tuner is selected in menu "Input set-
If three dots "
…
" appear in the second line of the display, the cassette is in
the "
station search
" mode. Please wait until the process has finished.
Once the HF receiver has synchronised to the input signal, any offset to the
target frequency is displayed in MHz, e.g. "
– 1.8
".
If a question mark "
?
" appears in the second line of the display, there is no
input signal present. In this case check the configuration of the antenna system
and head-end station as well as the preceding settings of the cassette.
FREQ
CN 9
Bx 4A
11835 -1.8
• Use
to position the cursor under the digit of the frequency displayed
to be set.
• Press
to set the respective digit of the input frequency needed.
• Repeat the procedure by the quantity of the digits to be set.
• Set the frequency offset shown in the display (e.g. "
– 1.8
") to less than
1 MHz by varying the input frequency using the
buttons.
