GSS HDMA 784 C ASI, Assembly Instructions Manual

Page: 23 / 40

- 23 - HDMA 784 C ASI
i
nput set tings
In this menu you select the channel strip (line) for which you would like to do
the input settings in the related submenus.
Bx 4
Tuner A INPUT
OK =>
—> In order to skip the "Input settings", press button .
—> "OK" indicates a present input signal.
• Using the buttons select the desired channel strip ("A"…"D").
—> Dependent on the "ASI settings" (page 22) you will get "Tuner" or
"Line" for selection. If "line" is displayed you will only get access
to the station filter settings. IF "tuner" is displayed, in addition you
get access to the tuner settings and if a CA module is retrofitted the
corresponding CA menu is available.
• Press button .
Selection Line:
—> The "Station filter" – e.g. "
01/06 " submenu is activated (page 26).
Selection Tuner:
—> The "LNB oscillator frequency, Input" – "
LNB " submenu is activated.
lnb
osCill ator freQuenCy
, i
nput
—> This menu is only available if a tuner is selected in menu "Input set-
tings" (page 23).
In this menu select the SAT input and set the oscillator frequency of the LNB
used.
LNB
In A
Bx 4A
10600 MHz
• Use buttons to place the cursor under the digit to be set for the oscil-
lator frequency displayed.