- 18 -
HDM 660 T
• Use
to select channel setting "
Channel
" or frequency setting "
Freq.
".
• Press the
button.
—> The "Output channel" resp. "Output frequency" – "
OUTPUT
" menu
is activated.
o
utput
frequenCy
, o
utput
Channel
, m
odul ator
In this menu, dependent on the setting before, you set the output frequency
(42.0 … 860.0 MHz) resp the output channel (C5 … C12, C21 … C69)
of the channel strip. Additionally the modulator of the channel strip can be
switched off or on.
Bx 1A
850.00 MHz
OUTPUT
on
or
Bx 1A
C21
OUTPUT
on
• Use the
buttons to position the cursor under the digit to be set for
the frequency or channel display then use
to set the desired output
frequency or channel.
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator of the channel strip using the
buttons.
—> The switched off modulator is indicated by "
- - -
" in the display.
—> When it is switched off, the status LED for the channel strip goes out
Bx 1A
– – –
OUTPUT
off
• If the modulator is switched "
off
" use the
to switch it "
on
".
• Press the
button.
—> The "Output levels of the channel strips" – "
LEVEL
" menu is activated.
