GSS HDM 510 CI TPS, Assembly Instructions Manual

Page: 30 / 38

- 30 - - 30 -
Notes:
– Increase the value of “Number 1”.
—> The “Number 1” can be increased to any value up to
7500.
– Reduce the value of “Number 1”.
—> With the station filter switched “ on ”, the “Number 1”
can be decreased. To do this, observe the “Number
2” for approx. 30 seconds and note the highest value.
Add roughly 10 % to this value. Do not decrease the
“Number 1” lower than the value of “Number 2”.
Is the “Number 1” lower than “Number 2” question
marks “
?? ” appear in the display.
Bx 4A
SR=6200 (6325) ??
STUFFING
• Press the button.
—> The “Setting a substitute signal in the case of an in-
correct input signal” – “
FAILURE
” menu is activated.
Setting a substitute signal in the case of an incorrect input signal
You use this menu to set whether a QAM signal filled
with “
Null Packets ”, a QAM signal filled with null packets
and self-made tables ” Tables “ or a “ Single Carrier ” signal
should be provided as an output signal whenever an incor-
rect input signal occurs. Self-made tables are transmitted
furthermore.
• Use the buttons to set the output signal required.
• Press the button.
—> The “Network Information Table” – “ NIT ” menu is ac-
tivated.
Bx 4A
Null Packets
FAILURE
Null Packets … Single Carrier