- 7 -
HDE 200
3.2 Connecting the cassette
To comply with the current EMC regulations, it is necessary to connect the
lines leading in and out of the head end station (e.g. cinch, HF) using cable
terminals.
When mounting the cassette in an STR 19-8 or PST 19-1 head end station
which is installed in a 19" cabinet, make sure that the connections leading in
and out (e.g. cinch, HF) at the 19" cabinet are made using cable terminals.
• Insert the required number of standard cable terminals (e.g. cinch, HF) in the
open ings provided (knock-outs) in the front of the head end station or the
19" cabinet. The cable terminals used are standard and are not included in
the scope of delivery.
Caution
Tighten the nuts of the cable terminals until the teeth on the lock washers put
under the nuts have penetrated the exterior coating and a good connection
is made between the housing and cable terminal.
Note:
– The following connection example show possible connection schemes.
