GSS HDE 200 Assembly Instructions Manual Download Page 6

Page: 6 / 17

- 6 -

HDE 200

2.3.1 Software versions

Cassette

How to query the software version of the cassette is described in the "Selecting

the channel strip, displaying the software version" section on page 12.

Control unit

If necessary, you can activate the indication of the software version of the con-

trol unit manually:

• Press any two keys on the control unit of the head end station simultaneously

until the display goes dark and the software version, e.g. "

V 41

", is displayed.

3 Installation

3.1 Installing the cassette

ote

Before inserting or changing cassettes, pull the mains plug of the head end

station out of the mains socket.

•

Screw the fastening screws

of an unoccupied slot out of the bracket of the

head end station.

• Insert the cassette in this slot and push it into the housing.

• Align the cassette and apply slight pressure to connect it to the connections of

the board on the back of the housing.

• Fasten the cassette with the screws

CASSETTE

MESSAUSGANG

CLASS

KLASSE

ACHTUNG!
Vor dem Cassettenwechsel

unbedingt

Netzstecker ziehen!

CAUTION!

Before

changing cassettes remove

mains plug!

Summary of Contents for HDE 200


















Search results

Summary of Contents for HDE 200

Reviews:

Related manuals for HDE 200

Brands by name

Popular brands

GSS HDE 200, Assembly Instructions Manual

Search results

Summary of Contents for HDE 200

Reviews:

Related manuals for HDE 200

Brands by name

Popular brands