- 8 -
HDE 166
3.2 C
onneCting
the
e
nCoder
module
E
D
F
G
AV1
AV2
AV3
AV4
• Connect the audio inputs
D
(right channel) /
E
(left channel) and video
inputs
F
to corresponding signal sources.
• Connect the LAN output
G
to the LAN input of a downstreamed compo-
nent.
3.3 emC
regul ations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
When mounting the module in a head-end station which is installed in a 19"
cabinet, make sure the connections leading in and out for the 19" cabinet are
made using cable terminals.
Tighten the nuts on the cable terminals until the teeth on the lock washer have pen-
etrated the exterior coating and a good connection is made between the housing
and cable terminals.
