- 13 -
HDE 166
s
eleCting
the
module
/
Channel
strip
• If necessary, press
repeatedly to select the particular module (
Bx
…)
to be programmed.
Bx 2
IP
4xENCODER
V 3
………
………
Bx 3
………
………
………
/
—> The display shows e.g. the menu
Bx 2 4xENCODER
IP
V 3
.
"
Bx 2
"
stands for slot 2
"
4xENCODER IP
"
type of module
"
V 3
"
software version of the module
• Press the button.
—> The "Ethernet settings" – "
ETHERNET
" main menu is activated.
e
thernet
par a meters
In this menu you specify whether the Ethernet parameters for the prospectively
intended control of the cassette are entered …
– automatically by a connected server ("
DHCP
") or
– manually via the menu ("
static
").
To assign the cassette uniquely, each IPTV cassette must be allocated its own
IP address.
—> If no Ethernet settings should be done, press button .
The "IP output signal" – "
OUTPUT
" main menu is activated (page 16).
Bx 2
static
ETHERNET
=>
Bx 2
DHCP
ETHERNET
=>
Bx 2
off
ETHERNET
=>
• Press the
buttons to select …
– manual setting ("
static
") or
– automatic setting ("
DHCP
") of the Ethernet parameter.