- 16 -
HDE 166
ip
output
signal
Herein you select whether you would like to generate
– a MPTS data stream, which includes all input signals, or
– four SPTS data streams, each one input signal included.
In addition you get access to the submenus for IP output and TS/ONID(s) set-
tings .
—> If no IP output settings should be done, press button .
The "Input parameter" – "
INPUT
" main menu is activated (page 20).
Bx 2
MPTS
IP-OUT
=>
• Using the
buttons select the desired kind of data stream (MPTS or
SPTS 1…4).
—> If "MPTS" is selected the IP output settings must only be passed one
time because all input signals are included in one data stream.
If "SPTS" is selected the IP output settings must be passed four times
(SPTS 1 … SPTS 4), because for each input signal a separate data
stream will be generated.
• Press button .
—> The "Output IP address" – "
OUT-IP
" submenu is activated.
