- 19 -
- 19 -
Setting the input symbol rate
The symbol rate of the satellite transponder can be found
in the current transponder tables of the various satellite
trade magazines or on the website of the respective service
provider.
• Using the
buttons, move the cursor under the digit
to be set. Use the
buttons to set the desired symbol
rate.
• Press the
M
button.
—>
The “Setting the input frequency” – “
FREQ
” menu is
activated.
Setting the input frequency
Notes:
– Once the HF receiver has synchronised to the input signal,
any offset to the target frequency is displayed in MHz,
e.g. “
– 0.8
”.
– If a question mark “
?
” appears in the second line of the
display, there is no input signal present. Check the configura-
tion of the antenna system and head-end station as well as
the preceding settings of the module in question.
• Using the
buttons, move the cursor under the digit to
be set. Use the
buttons to set the input frequency.
• Press the
buttons to adjust the input frequency so
that the frequency offset amounts to less than 1 MHz.
Bx 1A
27500
SYMBOL
/
/
M
Bx 1A
27500
SYMBOL
/
/
M
Bx 1A
11954 MHz
FREQ
-0.8
/
/
M
Bx 1A
11954 MHz
FREQ
-0.8
/
/
M
