- 5 -
HAV 160
2.4 d
escrIptIon
The AV connection board HAV 160 is designed for feeding audio and video
signals into the modulator modules HMM 470 and HMS 470.
The audio signals that have been fed in reach the AV interface via the audio
sockets (red = right-hand channel, white = left-hand channel / mono) as well
as the downstream level regulator. The video signals fed in via the video sock-
ets (yellow) are also here. The existing signals are fed to the modulator module
via the AV interface.
3
I
nstallatIon
3.1 I
nstallIng
the
module
– Observe the instructions for installing outlined in chapters 4 and 9 of the
assembly instructions STC 160.
– Assemble the AV connection board left of the corresponding modulator
module in a short, non-numbered groove.
—> The illustration shows, for example, slot 3 (modulator module) and
the slot for the add-on module (AV connection board) for installa-
tion.
B
A
• Insert the AV connection board into grooves
A
and
B
of the slot to the left
of the corresponding modulator module.
• Push the AV connection board with a little pressure into the head-end station
until they click into place.
