CozIR
®
-LP3 Evaluation Board User Guide
Revision 1.5: 15 December 2020
Page | 18 For regular updates, go to https://gassensing.co.uk
OTHER ENVIRONMENTAL SENSORS
The evaluation board also contains on-board temperature, humidity, pressure and current sensors.
These can be set to take measurements automatically at a pre-set period or set to take readings
manually. Note the time period can be set independently of the CO
2
sensor read period.
For manual readings, click ‘Manual Measurement’. Manual readings can be taken for each sensor
including the CO
2
sensor by clicking on the relevant button. The user interface in the lower centre of
the screen will update each sensor value when ‘Manual Measurement’ is clicked.
Alternatively, the sensors can be programmed to take readings continuously at the rate set in the
dialogue box. Click on the ‘Measure every 5 seconds box’, set the measurement period and click on
‘Set’.
The user interface in the lower centre of the screen will update every time period.
