TF-AUX-FM-Bluetooth-U disk-TF (cycle)
1. After power on, insert the microphone with 6.35" interface, and the speaker will
automatically enter microphone mode.
2. Insert the microphone with 6.35" interface before power on. After power on, it
needs to plug in and unplug the microphone interface again, so that the
microphone can work normally.
Low voltage indication: battery voltage < 3.4V, battery symbol flashes on display .
When charging, the indicator light is on, and the indicator light goes out when
the battery is full
.
Mode switching sequence
MICROPHONE MODE
Low voltage state
Charging state
Turn the power switch to the right to turn off, and then turn the power switch
to the left to turn on;
Reset after crash
Set the playback volume of the speaker and turn it off. The volume of the speaker
will be memorized next time it is turned on, the same as last time.
Volume memory
OTHER
SPECIFICATIONS
Bluetooth version:
Driver spec:
Size:
Net weight:
Frequency response:
Sensitivity:
S/N ratio:
Distortion:
Working distance:
Transmission Power:
5.0
Φ5.25in 2Ω/15W
246*156.5*342 mm
1900 g +/- 50 g
100HZ - 20KHZ
80dB
≥85dB
≤1% @ 10W
about 33 feet/ 10M
Class2, ≤4dbm
After power on, the mode priority of the speaker is: TF Card - U disk -AUX - Bluetooth, if
not inserted, skip the current mode and enter the next mode automatically;
Notice:
15
12
10
10
4
Summary of Contents for M1
Page 1: ...PARTY SPEAKER Manual M1 ...
