GSN PATROL 501, Installation Instructions Manual

Page: 2 / 2

SELECTING GLASS TYPE
AND COVERAGE RANGE.
Set the jumper W1 according to the
distance to the protected glass.
Set the jumper W2 according to the
protected glass type (see the figure).
TM
LW
PL
9
12
6
GLASS TYPE
RANGE ADJUSTMENT
W2
W1
PL
- PLATE
TM
- TEMPERED
LW
- LAMINATED
- WIRED
- COATED
- SEALED INSULATING
- PATTERNED
*
M
M
M
TM
position – for most glass types.
*
(TRIPLEX)
TM
LW
PL
RELAY
TAMPER
9m
12m
6m
GLASS TYPE
RANGE ADJUSTMENT
S2
OFF
ON
GLASS TEST
OFF
ON
MEMORY
DIGITAL
ACOUSTIC
GLASS BREAK
DETECTOR
G.S.N.
ELECTRONIC
COMPANY LTD.
+ 12V
CS
YELLOW RED
GREEN
S3
PATROL-501
S1
W2
W1
J1
LAST EVENT MEMORY.
Set the jumper S3 to
“ON”
position
for LED to provide indication of event
memory function for last 30 minutes.
LED starts blinking on alarm.
After the
period of 30 minutes the
memory is automatically erased.
S3
OFF
ON
MEMORY
GLASS BREAK
SIMULATION TEST.
1. Set jumper S2 to “ON” position.
The yellow LED will be ON – the
detector is in the “TEST” mode.
2. Replace the cover.
3. Use “FG-701” or “RG-65” Glass
Break simulator or any other models
to simulate the high frequency signal
of the glass breakage. The red LED
will flash on each simulator
activation.
S2
OFF
ON
GLASS TEST
GLASS BREAK SIMULATOR
– MODEL FG-701
ACTIVATE TEST FLEX MAN
BUTTON
OF START
NO MORE THAN 12 METERS
HIGH FREQUENCY TEST
ATTENTION!
During the “Glass Break Test” the
alarm relay is opened. After
the
“Glass Break Test” set jumper S2
to “OFF” position (operating mode).
SHOCK & GLASS BREAK
SIMULATION TEST.
The test is conducted in operating
mode (“OFF” position).
S2
OFF
ON
GLASS TEST
Replace the cover. Tap gently the
protected glass and activate the
simulator at the same time.
The red LED will be ON for 3 sec.
TECHNICAL SPECIFICATIONS.
Power input:.…...………..9 - 16VDC
Current consumption
In stand-by mode:...………..17.8mA
In alarm mode:...…………...18.7mA
Alarm period:...…..………….…3sec.
Warm up period: ………………2sec.
Detection range:...……..12m x 170º
Relay output:………….……………..
……………..N.C; 60V; 120mA; 16
Ω
Tamper:…..........................N.C.10 Ω
Microphone type:…...………………..
omnidirectional electret microphone
Operating temperature
range:……………..…– 30°C + 50°C
Storage temperature
range:………….…….– 40°C + 80°C
RFI immunity:…………..30 V/m at a
frequency range 10MHz-1000MHz
EMI immunity:.……………..50 000V
Dimensions:…….…….87x52x24mm
Weight:…………………………..58gr.
WARRANTY.
GSN Electronic Company Ltd.
warrants the product to be free
from defects in materials and
workmanship under condition of
observance of service regulations
and to be repaired or replaced
under absence of mechanical
damages for a limited period of
five years from the date of sale.
P/N: USM0E501 REV.A PRINTED IN ISRAEL