2
Important Safeguards
• This bathroom heater is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.(i.e. wall
switch)
• Ensure that the switch is in the off position
when changing the heat lamp (globe) or
light globe.
• Ensure that the wattage of the centre
replacement light globe is the same as the
globe supplied with the unit.
• E27 275W heat globes can be used in this unit.
• Ensure the grille is free of objects, dust build
up, etc. Make sure that the airflow through
the grille is not inhibited.
• Means for disconnection must be
incorporated in the fixed wiring, in
accordance with the wiring rules.
• Precautions must be taken to avoid the back-
flow of gases into the room from the open
flue of gas or other fuel burning appliances.
• When cutting the ceiling material, care must
be taken to ensure you do not damage
electrical wiring and other hidden utilities.
• This bathroom heater is to be installed so
that switches or other controls can not be
touched by a person in the bath or shower.
• The lamps are extremely hot when in use. Do
not touch to the lamps with any part of your
body when in use. Allow all lamps cool down
sufficiently before touching or replacement.
• The appliance shall, under no circumstances,
be covered with insulating material or similar
material.
Cleaning
• Ensure the Mistral bathroom heater is switch
off and cool down sufficiently before
cleaning.
• Remove globes when they are at room
temperature. Wipe with a damp cloth, never
immerse.
• Unclip lamp surround and wash in warm
soapy water. Always use a soft cloth, never
abrasives.
• Clean away any excess fluff from the inside of
the body, motor blade brackets.
• The exhaust fan requires regular cleaning
to ensure optimum performance. With the
power off, regularly wipe the fan clear of dust
and dirt.
• Clean the exhaust ducting kit, ensuring there
are no obstructions at the exit.
Warning
If the power cord is damaged, the power cord
must be replaced by either the service agent
or similarly qualified persons in order to avoid a
hazard.
This product has not been designed for any uses
other than those specified in this booklet.
Save These Instructions
