9
2.
Fit the
outlet
on top of range hood body.
3.
Install the range hood onto the bottom of cabinet board, fasten 6pcs
Screw (M4x35mm)
with
washers
. If gap
is there between range hood back and cabinet end, fasten 2pcs
Screw (ST3x12mm)
and
metal plate
onto
body
to fill it.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards
Installation of charcoal filters
When you choose front recirculation mode, charcoal filter is a must to be in stalled. Charcoal filter is opt ional
accessory.
Charcoal Filters are available at your local Bunnings Part Number: CF110 Fineline:5102399
1.
Remove
grease mesh filters
.
2.
Follow up below instruction you can remove or install charcoal filters.