background image

10 

WARRANTY

 

1.1 

In this warranty:

1.1.1 

Australian Consumer Law means the law as set out in Schedule 2 of the Competition and 

Consumer Act 2010; 

1.1.2 

Company 

means GSM Retail Australia  Pty Ltd ABN 53 007 682 475 of 142-144 Fullarton Road, Rose 

Park SA 5067. Telephone 1300 373 199. Email

 [email protected]

1.1.3 

Consumer 

means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law as 

the original purchaser of a 

Bellini 

 product;

1.1.4 

Consumer Guarantees 

means the guarantees under the Australian Consumer Law; 

1.1.5 

You 

means the Consumer. 

1.2 

Nothing in this warranty affects any person’s rights under the Australian Consumer Law. The benefits to any

Consumer under this warranty are in addition to the rights and remedies available under any Consumer Guarantees. 

1.3 

Subject to the other clauses of this warranty, the Company warrants to the Consumer that the

 

product will be free of manufacturing defects and will perform to the Company’s specifications. 

1.4 

The benefit of this warranty extends only to the Consumer as original purchaser of a 

Bellini 

product which is

 

installed in a domestic household area.  

*The  in  Home  warranty  does  not  apply  to  Commercial  and  or  industrial  usage.  *

Please  See  1.7.7  for  additional

information 

1.5 

This warranty commences on the date of purchase of the product by the Consumer and continues

for the benefit only of the Consumer until the expiry of three (

2

) year 

(Warranty Period)

.

1.6 

If within the Warranty Period a manufacturing defect is discovered in the

 Bellini 

product or it fails to perform to the

 

Company’s specifications as a result of some defect in materials, components or workmanship (Defect) then the Company 

will, at its option, repair the product or supply a replacement product free of charge. A replacement 

Bellini

product may differ from the original product purchased by the Consumer. 

1.7 

This warranty will not apply to any 

Bellini

 product:

1.7.1 

Installed by any person other than a qualified tradesperson; or 

1.7.2 

Subjected to misuse, neglect, negligence or accidental damage; or 

1.7.3 

Operated in any way contrary to any operating or maintenance instructions; or 

1.7.4 

Improperly handled, installed or maintained; or 

1.7.5 

Altered or modified prior to or after installation; or 

1.7.6 

Damaged directly or indirectly by power surges, electrical storm damage or connection 

to incorrect power supply 

1.7.7 

Industrial and or Commercial usage is inclusive of staff areas in office/ shop 

environments, hotel/ motel or other similar accommodation or rental type properties including Bed and 
Breakfast establishments. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY THE CONSUMER MUST CALL 1300 

373 199 (AUSTRALIA) OR 

0800 764 912

 

(NEW ZEALAND) TO CONNECT TO THE NEAREST AUTHORISED CENTRE 

The Australian Consumer Law requires the inclusion of the 

following statement with this warranty: 

Our goods come with guaranteed that cannot be excluded under the Australian Consumer 
Law. You are entitled to a replacement or refund for a major failure and for compensation 

for any other reasonably foreseeable loss or damage. You are also entitled to have the 

goods repaired or replaced if the goods fail to be of acceptable quality and the failure 

does not amount to a major failure. 

Summary of Contents for Bellini BBF145BI















Reviews: