GSM teknik
Page 4
4. Installation instructions
4.1 Preparation
4.1.1 Open the package to check the device model number is correct, be with full
accessories, or else please contact your supplier;
4.1.2 Choose SIM card, need insert a GSM SIM card into the device, please refer to the
suggestion of your supplier for SIM card choice.
Notice:
Please insert SIM card before turning the device power switch to on
; The SIM
card need open the GPRS function. Please make sure SIM card with full balance.
4.2 Installation
The device is hidden type installation, we suggest the device installing by
professional institution. Please pay attention to the following points:
4.2.1 To avoid the thieves destruction, the device installation place should be as far as
hidden.
4.2.2 Avoid putting the device with reversing radar, car burglar alarm and any other
vehicle communication devices;
4.2.3 Can fix the device by ribbon or wide sponge powerful two-side glue stick;
4.2.4 The device has built-in GSM and GPS antenna, make sure the receive side upward
and there is no metal shielding.
4.2.5 Recommended installation place:
①
The hidden place in the board below the front
windscreen;
②
The hidden place around former dashboard (nonmetal material for skin);
③
The hidden place in the board below the back windscreen.
Notice: If the windscreen glued by metal thermal insulation layer or heating layer, it will
reduce the GPS receive signal and lead to GPS work disorder, then please change the
installation place.
