GSM Activate GSM PT100, Manual

Page: 9 / 10

CONTINUED…..
If you want to get a current temperature reading send the text
# READ = TEMP # This will give you a current temperature reading
If you want to check the parameters that have been set send the text
# READ = PARAMETERS # This will give you the current parameter settings
Important Installer Notes
●
When installing the aerial antenna cable please ensure that the cable leaves the box by the
shortest possible route and is not coiled up and left inside the box
●
Do not stick the aerial onto any metal surface. This will degrade the signal strength
received.
● Please remove all voicemail functions from the simcard before installing it into the Auto
Dialler Plus. All major UK network voicemail removal codes are shown on page 5
●
Before commissioning, please ensure the signal strength is sufficient by sending the text
message # SIGNAL #
●
We strongly recommend you need a score of at least 10 for a good signal. Also try the signal
using 2G, 3G & 4G via dipswitch 1 & 2 and using the strongest signal strength.
●
If you do not receive a good signal, please reposition the aerial antenna to improve the
signal strength or alternatively change the network provider as signal strength can vary
between providers.
www.gsm-activate.co.uk - 01273462380 - sales@gsm-activate.co.uk
Page 9