How to Use the 3G GSM PROTECT - Hard Wired Usage
For advanced users there are auxiliary and alarm inputs that can be used to enhance the
security of your alarm by adding extra external hardware.
Relay Output - Positins 1 2 3
The GSM Protect has a relay output that can be used to switch on external electrical
devices such as lighting and additional sirens etc. For some applications such as boats,
you can also disenable the engine if it is wired to the ignition. The Output Relay is
independent and can be activated by sms text message.
By texting the unit you can turn the relay ON or OFF individually. Below are examples on
how to do this.
#
RELAY=ON
#
- This will turn ON the relay output.
#
RELAY=OFF
#
- This will turn OFF the relay output.
After each operation the unit will reply with a status report
REL ON/OFF
Wired Sensing Devices and Enable Trigger - positions 4 5 6 7
You can also add in extra sensors, switches etc into these positions as follows:
4 - Ground:
5 - +12v Auxiliary output, maximum current is 1 amp.
6 - Negative input trigger.
7 - Positive Input Trigger.
Wired Siren - positions 8 9
The alarm comes with a wired high decibel siren. This plugs into position 8 (plus 12v) and 9
(ground)
Page 7
