Instructions
IMPORTANT - PLEASE READ
Please ensure that you disconnect the power when you fit the simcard Then slide the
simcard into the holder ensuring the clipped corner of the simcard lines up with the clipped
corner of the simcard holder.
Powering the 2G/3G/4G Gate Opener
Connect 12 volts to the input connector as per figure 1. Once power has been applied the
blue
network LED light will flash once every second. Once a signal has been found the
green
ready LED will come on and stay on indicating the unit is ready to use.
Signal Strength
To help ensure that you place the unit in a suitable position you can text the unit
#
SIGNAL
#
The dialler will perform a test on the signal strength. You will then receive a signal strength
score of between 0 up to 30. We strongly recommend that place the unit where you can
receive a signal strength score of at least 10. Anything less than that will render the unit
unreliable.
2G or 3G or 4G
The GSM Gate Opener can work on either the 2G, 3G or 4G networks depending on
which
model you have. You can choose which network the unit will use at the start up using the
following dipswitch settings
Dipswitch 1 OFF & Dipswitch 2 OFF = Connects to 2G
Dipswitch 1 OFF & Dipswitch 2 ON = Connects to 3G
Dipswitch 1 ON & Dipswitch 2 ON = Connects to 4G
IMPORTANT - PLEASE READ
We strongly recommend checking the signal on 2G, 3G and 4G and using the signal that
has the highest signal strength score. The signal strength should be at least a score of 10
for reliability.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 3