How to use the 2G/3G Beam Alarm
Once you have positioned the beams, installed the simcard and programmed the
numbers the system is ready to use.
The GSM Beam Alarm is armed in two ways, you can arm it by text message command or
you can arm it using the key fob provided. In both scenarios, you need to arm the alarm
before the system can detect movement and send out an alarm alert to your phone.
Arm the alarm by text message
To set the alarm to ON you will need to send the text message
#
ALARM
=
ON
#
This will activate the alarm
#
ALARM
=
OFF
#
This will deactivate the alarm
It is important to remember that once the alarm has been triggered you will need to reset
the alarm by sending the text command
#
ALARM
=
ON
#
to reactivate the alarm or activate it
using the key fob.
Arm the alarm using the key fob
The key fob works best when used with the siren provided as you will get the audible alert
whenever you arm or disarm the alarm.
Press button A on the key ob
Arms the alarm and siren will beep twice
Press button B on the key fob
Disarms the alarm and the siren will beep twice
Again it is important to remember that when the alarm has been triggered you will need to
reset the alarm using either the text command (above) or by using the fey fob.
How to use the Relay Output
The relay has been programmed to trigger the siren for 60 seconds in the event of an
alarm activation. Once the text message and call has been received you can stop the siren
sounding by pressing B on the key fob.
If you do not require the siren to sound in the event of an alarm activation but require it so
that you hear the key fob activation you can turn the siren off by Dipswitch 1.
Dipswitch 1 ON = Siren is turned ON
Dipswitch 2 OFF = Siren turned OFF
If you require the ability for the relay to be independently activated like older versions of
this alarm, please contact us on 01798861346
Page 7
