GSK GSK983M-H, Manual

Page: 2 / 35

GSK983M-H/M-V Milling CNC System Connection Manual
Precautions for Connection
1、Requirement of the machine cabinet:
The cabinet installation of the system and driver should apply the full-close
dust-proof design. The temperature difference between the inside and outside of the
cabinet should be below 10℃. Heat exchange system is needed if the above condition is
not met. The ambient temperature around the system should be below 45℃. And the liquids
such as lubricant, coolant should be prevented from entering the inside of the system
components.
2、System fixation position:
Since the main cabinet is the control core of the CNC machine, it should be fixed
in priority at a location that has a little temperature rising, little electromagnetic
disturbance. Due to that the large power spindle driver and feed axis driver produce a
huge heating during their running, so the main cabinet and the I/O unit should be fixed
below them with over 100mm clearance as much as possible. Please refer to the appendix
of this manual for their installation drawing dimensions of the system.
3、Power should be supplied to system by isolation transformer. It is DC24V power supply that
is from power supply box only for CNC control, connecting this DC24V with another device(for
example brake、valve etc. ) is strictly prohibit, otherwise it is very danger!
4、Ground：
1