CONNECTING TO THE WEB-APP EDITOR
The GSi Gemini features an internal wi-fi antenna that is used to accept a connection
from any modern wi-fi device capable of browsing a web-site. With firmware version
1.15 (released in August 2016) it is possible to choose between two connection
modes. The first time you use your Gemini, you must use Method 1.
METHOD 1: Direct connection to Gemini
This is the default method and is restored every time the RESET button is used. Any
modern mobile device (tablets and smartphones) or any modern computer (desktop
or laptop) can be used to access the Editor web-app. The execution speed of the
Editor depends on the CPU power of your device. When the Gemini is on, use your
device's network options to start scanning for existing Wi-Fi networks. The Gemini
should cast an SSID that starts with "Gemini-xxxxxxxx" where the "x" are replaced by
an hexadecimal serial number that is unique per each unit. Complete the connection
using the following password: 00000000 (eight times zero). The password can be
changed later from the “Wi-Fi Settings” page of the Editor app and can be restored to
its default value at any time by pushing the RESET button found at the back of the
unit.
Once connected, open your favorite browser (Chrome, Safari, Firefox, Edge, etc.) and
type the URL “Gemini/” (the final slash is important, some browsers might not
recognize this as a URL) or type the IP number 192.168.1.1 The Editor home page
should load into your browser like a normal web site. This can be viewed either in
portrait or landscape mode, the page should redraw itself accordingly.
GSi GEMINI USER'S MANUAL - Page 13/20
