4. Assembly Instructions
40
PNEG-1773-EU
42'-135' “X” Series Ladder, Cage and Platform - European Standard
Platform Ladder Bracket Package
6. Attach the wall angle to the sidewall sheet using the hole 9-3/8" from the stiffener hole pattern with
3/8" hardware. Assemble the wall bracket to the wall angle with 3/8" hardware and tighten.
Attach left and right intermediate platform ladder bracket to the wall bracket and platform support with
5/16" hardware.
NOTE:
Do not force the wall bracket in or out.
Assemble the ladder and ladder brackets to the wall bracket using 5/16" hardware. The top ladder
rung must be level with the platform floor.
Figure 4V
Ref #
Part #
Description
A
LDR-5178
Intermediate Platform Ladder Bracket - Left
B
LDR-5177
Intermediate Platform Ladder Bracket - Right
C
LDR-5174
Intermediate Platform Bracket - Left
D
Attach ladder sidewall angle (LDR-5168) to bin wall here 9-3/8" from platform wall
bracket. Use 5/16"-18 x 1" flange bolt (S-10260) and 5/16"-18 flange nut (S-10268).
E
Attach intermediate platform ladder to platform wall bracket using 5/16"-18 x 1"
flange bolt (S-10260) and 5/16"-18 flange nut (S-10268).
F
Attach ladder sidewall angle (LDR-5168) to platform wall bracket using 3/8-16" x 1"
flange bolt (S-7485) and 3/8"-16 flange nut (S-9426).
G
9-3/8"
