4. Assembly Instructions
PNEG-1773-EU
42'-135' “X” Series Ladder, Cage and Platform - European Standard
15
Platform and Safety Cage Bar
4.
shows the assembly of the platform post and post supports. This must all be assembled
at the same time using 5/16" hardware.
Figure 4B
Ref #
Part #
Description
A
STX-0076
Eave Platform Corner Post
B
STX-0015
Platform Corner Post. Three (3) per 72'-135' eave platform.
C
LDR-5171
24" Safety Cage Bar. Two (2) per 72'-135' eave platform. Attach using 5/16"-18 x 1" flange bolt
(S-10260) and 5/16"-18 flange nut (S-10268). The end that mounts to the platform angle will be
outside of the toe kick. The end that mounts to the post will be inside of the toe kick plate.
D
LDR-5205
Eave Platform Post Support. One piece assembled under the platform to reinforce the
platform corner. This piece mounts to both the platform short angle and the platform long
angle. Attach using 5/16"-18 x 1" flange bolt (S-10260) and 5/16"-18 flange nut (S-10268).
E
Attach all handrail posts to platform using 5/16"-18 x 1" flange bolt (S-10260) and 5/16"-18
flange nut (S-10268).
