GSI Group PNEG-1813, Installation And Operation Manual

Page: 40 / 58

3. Operation Procedures
40 PNEG-1813 Electronic Distributor Control
Position Locations Screen
This screen allows the user to adjust the spout positioning so it lines up with the center of the distributor
discharge. Adjustments can be made individually or an offset can be used to adjust all spouts by the same
amount.
Figure 3M Modify Spout Positioning
Modify Spout Positioning:
1. From the “Setup Menu”, select “Position Locations” to bring up the “Modify Spout
Positioning” screen.
2. In the “Modify Spout Positioning” screen select the spout that requires adjustment by
touching the value pad next to the spout number balloon. A number keypad will display
(See Figure 3N.)
Figure 3N Number Keypad