6
Operating principle / adjusting the system
That’s all there is to it! Your
GSE AIR’SYSTEM
is now adjusted and ready
to go. The system will automatically regulate the temperature inside your
home depending on the heat available under the panels.
CASE N°4 :
Your system will vent the heat through the roof cap, even if you ask for more heat inside the house. In this case,
the system ventilates the panels and prevents the “overheated” air from entering your home.
Overheat mode: Under-panel temperatures above 57°
57°C
ADJUSTING THE SYSTEM
DANGER! Never use the “stand-by” mode on the thermostat as this
could damage the system.
Fresh air injection in summer will not activate by asking for « cold »
on the thermostat, but automatically if temperature allows it.
Your technician will install the thermostat in the room of your
choice. It is this device which will tell to
GSE AIR’SYSTEM
whether to send hot air into your house or not. To adjust it,
nothing’s easier: just press the buttons (+) and (-) to set the
desired temperature.
Increase the temperature by pressing in this area
Decrease the temperature by pressing in this area
Setting
temperature
➤
Ambient
Température
➤
