GSA PTC HEATER
ENGLISH
TIP-OVER SWITCH
The fan heater is fitted with a tip-over switch safety cut-off
protection device which switches the fan heater off if it
falls over or is not vertical. The fan heater will start working
again once it has been returned to the upright
position on a level surface.
OVERHEATING PROTECTION
The fan heater has a built-in thermal overheating protec-
tion device. If the overheating protection is triggered,
the heating element is automatically shut off. Allow the
overheating protection to cool for 5 minutes. The fan heater
will now work as normal when switched back on again.
MAINTENANCE
• Always un-plug the heater from the wall socket and
allow it to cool down before cleaning.
• Clean the outside of the heater by wiping with a damp
cloth and buff with a dry cloth.
• Do not use any detergents or abrasives and do not allow
any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it
should be protected from dust and stored in a clean dry
place.
SPECIFICATIONS
Supply voltage ............ 220–240 V, 50 Hz
Power settings ............ Fan/1000/1500 W
Size (W×D×H) .............. 190x145x255 mm
RESPONSIBLE DISPOSAL
Care for the environment! Must not be
discarded with household waste! This product
contains electrical or electronic components
that should be recycled. Leave the product for
recycling at the designated station e.g. the
local authority’s recycling station.
WARRANTY
The product has 1 year warranty valid from the date of
purchase. The warranty applies only to material or
fabrication errors. The warranty ceases to apply if the
operating instructions have not been followed or the
product has been exposed to abnormal load or operation.
All transport and dismantling costs are at the buyer’s
expense. In case of disputes, the Purchasing Act applies.
Manual_450110.indd 7
29.04.2019 11.23
