IQAN-G2
IQAN-G2
SIM
CARD
NOTICE
ESD precautions should be taken during disassembly.
• Use the enclosed ESD wristband when opening the
enclosure to install the GSM SIM card.
NOTICE
Possibility of electrostatic discharge when installing SIM card.
• Continue to wear the enclosed ESD wristband when
installing the GSM SIM card.
Install the SIM card.
3. Slide the SIM card into its slot with the
contact area down.
4. Carefully reassemble the enclosure and
install screws.
Open the enclosure.
1. Remove the screws holding the enclosure
together by using an appropriate driver.
2. Carefully pull the enclosure halves apart.
remove
NOTICE
Remember to set the PIN code.
•
The correct PIN code must be
set in the unit (using IQANrun)
before mounting the SIM card.
Otherwise the SIM card could
be locked.
NOTICE
Register the modem before using.
•
Before operation, the modem
needs to be registered at
http://parker.proemion.com.
