GS-Traq GS-Traq TR-206, User Manual

Page: 60 / 63

TR-206 page 60
13 Simple Command
You could send simple commands to TR-206 by mobile phone’s
SMS. In order to protect the privacy, the simple command should
be followed after the password of the “Device Utility.” (Please
refer to page 48 and page 52.)
The simple commands must be capital case.
The simple commands could be optionally added with the equal
mark and the concerning parameters. If you do not add
parameters with the simple command, TR-206 will take the
present setting as the setting.
The simple commands are “ping TR-206”, “TR-206 periodic
report”, “TR-206 motion report”, and “Link to server.” For ping
command, you could set the tolerance time of GPS fix. For
periodic report, you could set the report interval. For motion
report, you could set the static report interval and the moving
report interval. So there are two simple commands for TR-206 to
switch to motion report, one is “MM” for setting moving report
interval, and the other is “MS” for setting static report interval.
The unit of the simple command’s concerning parameters is
second.
Below please find the table of simple command.
You could send several simple commands in one SMS. The
simple command is separated by the “comma.”
Command Code Word Concerning Parameter
Ping PI =tolerance time of GPS fix