4.3.2. Connection cable
Use the appropriate cable for the connections to avoid overheating or
unnecessary losses. It is better to use cables that are too thick.
Screw the cable connections or GS-Power copper bars tightly (M8), a
loose cable leads to high heat development.
4.4. Connecting a charger to the battery
Make sure you have completed all the steps previously
described in chapter 4 before connecting the battery to the charger.
4.5. Disconnecting a battery
•
First disconnect the negative cable from the negative (-) terminal
of the battery.
•
Disconnect the positive cable from the positive (+) terminal of the
battery.
General information
Follow the safety guidelines and measures in chapter 1.
Never overcharge the LiFePO4 battery, as this will permanently
damage the battery; only use a class 2 LiFePO4-capable charger.
See, among other things, at:
"www.gs-power.net"
Before use, charge each LiFePO4 battery individually.
Disconnect the charger from the battery if it will not be used
for a long time.
•
Connect the charger according to the description.
•
Charge the battery in case of disconnection due to undervoltage
or when the charge status drops below 20% to maintain battery
life.
