GS ARC DOT L FW, User Manual, Page: 12 / 20

11
5. INSTALLATION INSTRUCTIONS
5.1. Rigging using the omega brackets
Fix the clamp to the bracket by tightening the M12 nut and bolt to the bracket through the
13 hole in the middle of the bracket
.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the luminaire
.
Tighten the quick-lock fasteners fully clockwise
.
Pull the safety cable through the holes on the bottom of the base and over the trussing
system or another suitable rigging point. Insert the end into the carabiner and tighten the
safety screw
.
Important
This step is very important to ensure safe rigging of the luminaire
.