WIRING AND ELECTRICAL RISKS
Run all the wiring in accordance with the rules in force.
For the connection of the PV modules to a system of protection lightning enforce the regulations
national regulations.
Installation or implementation that does not comply with the rules can cause damage to people and
property. The electrical activation of the photovoltaic modules can only be performed by specialized
and authorized electricians . The photovoltaic modules are generators of voltage electricity and
therefore Potentially dangerous.
Even in the presence of a minimum intensity light it can generate the maximum voltage in vacuum.
A
GruppoSTG Fabbrica Srl
module generates electricity when he is exposed to sunlight or other
sources of light. Cover up completely the surface with a material opaque during the operations of
installation, removal and manipulation.
Before the start of the works to interrupt the power supply electricity of the modules to avoid the risk
of formation arc voltaic.
Do not disconnect any connections under load.
Do not insert or unplug never the connectors when they are under tension.
Always work in non-humid conditions, both as regards the
GruppoSTG Fabbrica Srl
module and the
instruments. During installation, the photovoltaic modules and especially the connectors and tools
must be dry.
Cater to a protection sufficient to avoid the contact with components conductors of voltage. Equipping the
installation of special devices to protect electrical adequate.
Use tools specially coated with insulating material when working on the
GruppoSTG Fabbrica Srl
module .
Before installation check that cables and connectors are not damaged. Protect the socket contacts from
dust and dirt. Do not perform connections if the contacts of the plug are dirty.
Protect the cables against damage. The connections must be in perfect mechanical and electrical
condition .
