Grunkel LED-320 FIO, User Manual

Page: 55 / 100

1
6
Choose one of satellite signal list and press OK button to enter setting interface. The orbit positions you
can select are just 019.2E and 019.2W. For LNB type, the system provides many options to fit your
needs. You can open one or close all about Diseqc. Diseqc1.0 can switch from LNB1 to LNB4.
Diseqc1.1 can support LNB from 1 to 16.As motor, you should choose Diseqc kind and then set move
position. You are able move audio from east or west. If you don’t need it, you can set as stop.
The unicale setting is same with the circumstance of DVB-S auto tuning.
Y ou should input satellite name, symbol rate, Polarity after pressing yellow button. Then you press
Enter button and the satellite addition can successfully finish.
Band Ku