Ocus® User Guide version 9.0
22
Hermiankatu 6-8G, 33720 Tampere, Finland
©2021 Grundium. All rights reserved.
Image 19
Navigator window
9.
Press
Scan
to start the scanning. The remaining scan time is shown on screen and once the scan is
completed, the scanned areas are marked with gray outlines in the overview image and you can
zoom into them.
9.1
OPTICAL SECTIONING (Z-STACK)
Optical sectioning (z-stack) mode can be used to scan the sample with different focus depths. The number of scan
layers and their offset from optimal focus plane can be defined in Scan Mode settings (see Image
). The settings
view can be entered by pressing
Configure
button next to Scan mode (see Image 19). The estimated scan time is
updated accordingly.
Summary of Contents for OCUS MGU-00001
Page 1: ...USER GUIDE MGU 00001 ...