ENGLISH
5
CONNECTION/PREPARATION
__________
Mounting the table base
Diagrams are contained in the assembly instructions enclosed with the
table base.
1
Fasten the two brackets to the table base using the hex socket
screws supplied.
2
Remove four fixing screws for each bracket from the back of the
device.
3
Place the stand on a level surface.
4
Put the device on top of the stand.
5
Fasten the stand to the device by screwing four screws to the
back of the device for each bracket.
Setting up and connecting the loudspeakers
1
Fasten the brackets to the speakers using the screws supplied.
2
Screw the speakers to the brackets on the device using the screws
supplied.
3
Use the speaker cable supplied to connect the »
SPEAKER
OUT L R
« terminals on the device to the »
INPUT L R
« termi-
nals on each speaker.
Connect the cables marked in red to the red terminal.
7 W
4
Ω
INPUT
7 W
4
Ω
INPUT
L
YPbPr
udio in
DVI–D
SPEAKER OUT
R
PC–IN
