Chassis P7
GRUNDIG Service
1 - 5
Service Menus
display
factory mode
panel
power on time
back light time
off
1280x768
only for use in factory
Shows the panel resolution. It is a read only option and can not be set.
xx:xx:xx
xx:xx:xx
LCD TVs only: Gives information about the last update time of the SW running. It is a read only
option and can not be set.
LCD TVs only: Backlight on time option reserved.
scart prescale
nicam prescale
fm/am prescale
agc adjust
25
45
Sets the prescale values for the input sounds entering the scart input of the MSP (Micronas So-
und Processor). Changing this value you can adjust the level of the output sound going to
loudspeakers for all the sources except the Tuners. The range is between 0 and 100.
Sets the prescale values for the Nicam standard sounds for tuner inputs. Changing this value you
can adjust the level of the output sound going to loudspeakers for Nicam sounds entering the ana-
log sound input of MSP. The range is between 0 and 100.
24
16
Sets the prescale values for the FM/AM standard sounds for tuner inputs. Changing this value you
can adjust the level of the output sound going to loudspeakers for FM/AM sounds entering the
analog sound input of MSP. The range is between 0 and 100.
Sets the input voltage going to IF decoder AGC pin. Changing this value you can adjust this volta-
ge for optimum Tuner performance. The range is between 0 and 31.
red brightness
red contrast
green brightness
green contrast
128
128
These are used for color bias adjustment. The range is between 0 and 255
128
128
blue brightness
blue contrast
calibre
video format
128
128
automatisch/auto
Forces the video format to the desired format. Selectable formats are Auto, PAL, NTSC and SE-
CAM.
color space
test pattern
color components
solid field level
RGB
keine/none
Gives information about the video colorspace input to PW181 IC. Do not change this value unless
an error occurred in the colors displayed.
Activates the internal pattern of PW181 IC. There are 3 choices: none, vert bars, solid color. None
will deactivate the internal pattern. Vert bars choice activates the bar pattern for the selected color
component. Solid color activates the solid pattern with one color selected in color component and
also you can change the level of the color by solid field level.
all
33
Selects the color for the internal pattern of PW181 IC. There are 4 choices: all, red, green and
blue. If you choose all, you can see the white pattern and if you choose one of the other choices
you can see the test pattern with the selected color.
This option will adjust the level of the colors for the test pattern. The range is between 1 and 64.
initial ats
factory reset
dpms
osd time out
aus /off
press <ok> to reset
This option will enable or disable the Initial setup for the TV. Setting this option to On, the TV will
open from the Quick setup menu. Setting this option to Off will disable this option.
Factory reset option executes a reset operation for the NVRAM. Pressing OK when this option is
selected will erase the NVRAM and load default values to NVRAM.
ein/on
60 sec
This option selects the Power option for the TV. Setting this option to On the TV will switch to the
last state for power on transition. Setting this to Off will disable this option and the TV will always
switch to Stand-by state while power on transition.
This option sets the OSD timeout for the main menu structure. Selections are 5, 15 and 60 secs.
The default is 60 sec.
backlight
child lock mode
15
off
Intensity of the backlight
sets with keyboard - on; sets without keyboard - off
Service- und Sonderfunktionen
Tastenfunktionen TP160C (TP L6B)
i (MENU)
- Aufrufen des Service Menü
- Menü-Punkt aktivieren
- Untermenü verlassen
P+ (
Q
)
/
P- (
R
)
- Menü-Zeile (Menüpunkt) wählen
ǸǸǸǸ
(
O
)
/
ǷǷǷǷ
(
P
)
-
Untermenü auswählen
- Wert ändern
Service-Mode aktivieren
– Taste "
i
"
(
"
MENU
"
)
auf der Fernbedienung drük-
ken. Menü "bild" wird eingeblendet.
– Service Nummer "8500" ("9301") eingeben.
Service-Mode beenden
– Taste "
i
"
(
"
MENU
"
)
auf der Fernbedienung drük-
ken.
Software-Versionsnummer
Im Service Menü "version" wird die Versionsnum-
mer angezeigt.
Service and Special Functions
Functions of the buttons TP160C (TP L6B)
i (MENU)
- Call up the Service Menu
- Activate menu point
- leave submenu
P+ (
Q
)
/
P- (
R
)
- Call up the dialogue line
(point of menu)
ǸǸǸǸ
(
O
)
/
ǷǷǷǷ
(
P
)
- Select submenu
- changing the settings
Calling up the Service Mode
– Press button "
i
"
(
"
MENU
"
)
on the remote control.
Menu "picture" appears.
– Enter service code "8500" ("9301").
Exit the Service Mode
– Press button "
i
"
(
"
MENU
"
)
on the remote control.
Software Version Number
The software version number is shown in service
menu "version".
TP 160 C
TP L6B
Die angegebenen Werte sind Mittelwerte, die ab-
hängig vom LCD-Panel abweichen können.
Bei Austausch der Speicher oder der Chassisplatte
muss die zum LCD-Panel passende Software ein-
gespielt werden.
The above specified values are averages and can
vary dependend on the LCD panel.
A software which corresponds with the LCD panel
must be programmed after changing the memory or
the chassis.
Summary of Contents for XEPHIA 42 PW 110-5501 TOP
Page 36: ...GRUNDIG Service Chassis P7 2 31 Leiterplatte PCB Ansicht auf L tseite View on Solder Side...
Page 37: ...GRUNDIG Service Chassis P7 2 32 Leiterplatte PCB Ansicht auf L tseite View on Solder Side...
Page 38: ...GRUNDIG Service Chassis P7 2 33 Leiterplatte PCB Ansicht auf L tseite View on Solder Side...
