10
STARTING
_____________________________________________________________________________
Switching on and operation
1
Switch on both receivers by using the »
POWER
« switch.
– The displays illuminate red.
2
Switch on your television set.
3
Activate the »Dolby Surround Prologic« (see the operating manual for your
TV set) function in the sound menu for your television set.
Notes:
The transmitter will be automatically switched on if the TV programme or the
AUDIO/VIDEO playback is transmitted with Dolby Surround Prologic.
– The transmitter display illuminates green.
The sound signal of the TV set is transmitted to the receivers via the transmit-
ter without use of a wire and the receivers are ready for operation.
– The receiver displays illuminate green.
If a sound signal is not transmitted, the transmitter and both receivers will
switch off automatically (approx. 1-2 minutes).
– The display illuminates red.
Notes on operation and possible interference
Your WIRELESS SOUND TRANSMITTER is equipped with an HF system which
enables the transmission and reception of audio signals without additional
cable. International and national regulations limit the HF transmission power to
avert radio interference signals which could, for example, come from your
neighbors. The HF output is 10 mW. This guarantees a receiving distance of
approx. 30 m in free space. If the distance to the transmitter is greater, the sig-
nal is too weak to be received.
Under certain circumstances, persons, walls or other surfaces can reflect the
radio signals. Reflected signals mixed with direct (non-reflected) signals can
cause signal disturbance, called multipath reception. This can lead to audio
distortion or a short period of loss of sound. If this type of signal disturbance ari-
ses, positioning the transmitter in a different location will be sufficient to
rectify the problem.
ON
OFF
