Grundig Vertiga UMS 4600 DEC Manual Download Page 27

ENGLISH

27

Cleaning the CD unit

If the device is unable to scan CDs perfectly, use a standard, commer-
cially available cleaning CD to clean the laser optics. Other cleaning
methods may damage the laser optics.
To clean CDs use a lint-free cloth and wipe them in a straight line from
the centre of the disc outwards. Do not use cleaning fluid for vinyl
records or other solvents or scouring agents.

Technical data

This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety 
regulation IEC 60065.
Do not open the hi-fi casing under any circumstances. No warranty claims are accepted for damage resulting from
improper handling

INFORMATION

_______________________________________________

System

Power supply:

Operating voltage: 230 V~
Mains frequency: 50/60 Hz
Max. power consumption: 28 W
Power consumption in stand-by: 

5 W

Amplifier unit

Output:

Sine wave power: 2 x 5 W
Music signal power: 2 x 8 W

Receiver unit

Reception range:

FM 87.5 ...108.0 MHz
MW 522 ... 1620 kHz

CD unit

Frequency response: 

100 Hz ... 15 kHz

Noise-voltage 
ratio:

(wtd.) 

60 dB

MP3 features

Albums and files: 

Max. 200 albums, max. 500 files per CD

File system/file management:

ISO 9660 Level 1 compatible

Dimensions and weight

Device dimensions: 
W x H x D 170 x 172 x 250 mm
Device weight: 2.4 kg
Loudspeaker dimensions: 
W x H x D: 128 x 255 x 148 mm
Weight per loudspeaker: 0.85 kg

Technical and design modifications reserved.

Summary of Contents for Vertiga UMS 4600 DEC





























Reviews: