8
ENGLISH
OPERATION_______________________________
Charging
If run with the installed rechargeable nickel metal
hydride batteries, use the charging station with the
mains adapter as a charger.
1__
Remove the accessory used.
2__
Insert the appliance in the charg-
ing station
G
so that it precisely fits.
– The charging contacts of the appliance and
the charging station touch each other.
Plug the mains adapter into the wall socket.
– When the appliance is charging, the charge
indicator LED
D
lights up red.
– When the appliance is fully charged, the
charging LED
D
lights up blue.
Note
7
Fully charge the batteries before using for the first
time or if the batteries have not been used for a long
time (8-10 hours).
7
Charge the appliance at room temperature. Lower
or higher temperatures have a negative effect on the
life of the batteries.
7
The ambient temperature should be between 5˚C
and 40˚C.
7
When fully charged, the appliance works for around
20 minutes. It is not advisable to charge the batteries
after every use, especially if you do not use the
appliance for the full 20 minutes. Only charge the
batteries when they are completely discharged.
This increases their life. Do not charge it every day.
Disconnect the power supply unit from the socket.
Switching_on_and_off
1__
Remove the appliance from the charging station
G
.
2__
Switch on the appliance by pushing the on/off
button
E
.
3__
Switch off the appliance by pushing the on/off
button
E
.
4__
Insert the appliance in the charging station.
