
20
Alarm mode
Checking the alarm time
1
Check the alarm time (in stand-by, tuner or CD mode) by pressing and holding down
»
DISPLAY MODE
« on the device until the set alarm time flashes.
– Display: »
e
« flashes.
2
To end the display of the alarm time, press »
DISPLAY MODE
« on the device until the
current time or the input source appears in the display.
Interrupting and repeating the alarm
The duration of the alarm is 60 minutes regardless of the alarm type. You can interrupt the
alarm function. After every 9 minutes, the alarm sounds again.
1
Move your hand over »
SNOOZE SENSOR
« on the device to interrupt the alarm.
– Display: »
«.
– The alarm goes off again after 9 minutes.
Note:
You can interrupt the alarm as often as you like within the 60 minute alarm duration.
Switching off the alarm
1
Press »
ɷ
/
e
« on the device while the alarm is sounding, until »
e
« disappears;
or
during the radio or CD alarm, press »
ɷ
/
e
« on the device until »
e
« goes out in the
display, or press »
ON/OFF
« on the hi-fi to switch to stand-by mode.
Activating and deactivating the alarm
1
To switch off the alarm for the following days, press »
ɷ
/
e
« on the device until »
e
«
goes out.
– The set alarm time is saved.
2
To activate the alarm, press »
ɷ
/
e
« on the device until alarm source (signal tone, tuner
or CD) appears in the display.
– The hi-fi system sounds daily at the set alarm time.
SNOOZE
OTHER MODES
_______________________________________________