40
TAPE MODE
____________________________________________________________
Recording
Erase protection
Every new recording overwrites the existing recording on the tape.
You can protect your own tapes against accidental erasure by breaking the
safety tabs on the top of the tape. Pre-recorded commercial music tapes are
already protected against accidental erasure. If you want to record on to a
protected tape, cover the opening with adhesive tape.
Recording from the tuner
1
Place a cassette with the protection tabs intact in the tape compartment and
use »
F.FWD
4
« or »
3
REWIND
« to find the correct position on the
tape.
2
Select the tuner input source by pressing »
TUNER /BAND
«.
3
Select the desired preset station by pressing »
P +
« or »
P –
«.
4
Press »
RECORD
•
« to start the recording.
5
Pause recording by pressing »
PAUSE
II
«. Press »
PAUSE
II
« to resume
recording.
6
Press »
STOP
7
/
ə
« to stop recording.
Notes:
The hi-fi system automatically stops recording at the end of the cassette side.
If audio interference occurs during the recording of a MW station, set the
»
BEAT 01
« or »
BEAT 02
« positions by pressing »
STEREO/BEAT CUT
« on
the remote control.
BEAT 02
02 UMS 4401 SPCD, GB 07.07.2004 14:35 Uhr Seite 40
All manuals and user guides at all-guides.com