Grundig TR 2200 DAB Plus, Manual

Page: 10 / 15

ENGLISH 22­ ­
OPERATION
------------------------------------------------------------------------------------------------------------------------------
General­functions
Switching­on­and­off
1 Press » ON/OFF « to switch the device on and
off.
Adjusting­the­volume
1
Adjust the volume using »
–­­+
«.
Adjusting­the­tone
1 Open the menu with » Menu «.
2
Select the option »
System
«
with »
r
­Tuning­
e
« and confirm by
pressing »
Select/i
«.
3
Select the option »
Equaliser
«
with »
r
­Tuning­
e
« and confirm by pressing
»
Select/i
«.
– Display e.g.: »
Loudness
«.
4
Select the desired option with »
r
­Tuning­
e
«
and confirm by pressing »
Select/i
«.
5 Press » Menu « to end the display.
Listening­with­headphones
1
Connect the headphones to the »
PHONE
«
headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
7
Excessive sound pressure from the earphones
or headphones can cause hearing loss.
DAB­mode
For the best DAB reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting­the­input­source­DAB
1 Select the input source DAB
with » Mode/Alarm «.
– Display: »
DAB Mode
«, then the name of a
DAB radio station.
Selecting­stored­stations
1 Select the station you want using the preset but-
tons » 1 « to » 5 « (presets 1 to 5) or using » +­5 «
and the preset buttons » 1 « to » 5 « (presets 6 to
10);
or
select the desired station step by step by
pressing »
r
­Tuning­
e
« and confirm by
pressing » Select/i «.
Displaying­DAB­station­information
1 To display information on the current DAB sta-
tion, press » Select/i « repeatedly.
– The following display appears in succession:
Information from the provider (e.g. the title
of the song, the e-mail address), the signal
strength, the genre, the Ensemble (e.g. BR for
Bayern), the current frequency, reference to
signal interference (at optimum signal display
»
Signal error: 0
«) the bit rate, the
broadcasting format, the current time and
date.
Setting­Dynamic­Range­Control­
(DRC)­for­DAB­stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1 Open the menu with » Menu «.
2 Select the option »
DRC
« with »
r
­Tuning­
e
«
and confirm by pressing » Select/i «.
– Display: »
DRC off
«.
3
Select the option »
DRC high
« or »
DRC
low
« with »
r
­ Tuning­
e
« and confirm by
pressing » Select/i «.
4
Press »
Menu
« to end the display.
Note:­
7
The DAB station must support DRC.