Grundig TR 1200, User Manual

Page: 7 / 8

11­ ­ ENGLISH
OVERVIEW
­---------------------------------------------------------------------------------------------------------------------------------
OPERATING
-------------------------------------------------------------------------------------------------------------------------------
See the figure on page 3.
Controls­on­the­front
ß
Adjusts the volume.
FM
Selects the waveband FM
(UKW).
AUX Selects the input source for an
external device.
ON/OFF
Switches the device on and off.
●
­FM
For tuning to a radio station,
with station and waveband
scale.
■
­­
Tuning indication, lights up at
the best possible station setting.
Controls­on­the­back
– Telescopic antenna.
PHONES Earphone socket (3.5 mm
stereo plug).
Mono playback via earphones.
AUX­IN Audio signal input (stereo/
mono) for connecting to an
external device
AC:­230V­~­
50/60­Hz
­ Connection socket for power
­
cable supplied.
Radio­mode
1 Press » ON/OFF « to switch on the device.
2
Select the FM waveband with »
FM
«.
Note:­
7
For the best FM reception, extend the tel-
escopic antenna and direct it accordingly.
3 Find and tune the station using » ●­FM­ «.
– The „tuning indication“ lights up at the best
possible station setting
4
Adjust the volume using the turning knob
»
ß
«.
5
Press »
ON/OFF
« to switch off the device.
Listening­to­an­external­source
1 Use a standard audio cable to connect » AUX­
IN
« on the back of the device to an AUDIO
OUT socket on the external equipment.
2 Press » ON/OFF « to switch on the device.
3
Select the input source for the external device
with » AUX «.
4
Adjust the volume using the turning knob
»
ß
«.
5
Start playback on the external device.
6 Press » ON/OFF « to switch off the device.
Automatic­shutdown
If no audio signal is available on socket
»
AUX­IN
« the device switches automatically to
Stand-by mode after 15 minutes. For further use
switch on the device again.